Growing Creeping Wire Vines

Creeping wire vine plants

Planting your own creeping wire vines can be a fulfilling experience.

In this guide, we’ll cover what you need to know to grow your own creeping wire vines.

Planting creeping wire vines seeds

If you are starting your creeping wire vines from seed, the timing of your planting will be a bit different. Aim to plant the seeds with enough time for them to germinate, sprout and mature before you plant them outside.

To plant the creeping wire vine seeds, purchase some potting soil and fill a container or tray with the potting soil. It doesn’t have to be a deep container — even a shallow tray will be fine for creeping wire vine seeds. 

You can purchase plastic pots or packs to plant them, or use something you have lying around your home, such as an egg carton.

Once the container is full of potting soil, poke a hole in the soil with your finger no deeper than the first joint in your finger. Then, place the creeping wire vine seed in the hole and cover it up lightly with potting soil.

To initiate the seed’s growth, water the creeping wire vine seed lightly.

Try to keep the soil in direct sunlight as much as possible. You can cover it with some clear plastic to keep the humidity high as well. 

Make sure to keep on watering the soil lightly whenever it dries out. The soil doesn’t need to be more than damp, but it does need to be moist consistently for the creeping wire vine seed to germinate.

You’ll soon start seeing a baby creeping wire vine sprout emerging from the potting soil.

Transplanting creeping wire vines seedlings

After the creeping wire vine sprouted, you’ll want to let it grow a little bit to establish a root structure. If the seedling is planted with its own space to grow, you won’t need to transplant it until it grows its own root cube. 

However, if the creeping wire vine seed was planted with other creeping wire vine seeds in its own space, it should be planted earlier so that its roots aren’t in competition for limited space.

As long as the roots have room to grow, you’re fine to keep the creeping wire vine in its container. 

If you notice that the creeping wire vine seedling is drying up fast, this may be a sign that it’s time to plant it in a larger container. You can transplant a creeping wire vine however many times you’d like before planting it in its final destination.

To transplant a creeping wire vine, pinch the bottom of the container as you gently pull the sprout up. If the seedling is very small, you can turn the pack upside down as you do this for each sprout so that the plant and its early root structure fall out into your hand. 

If the creeping wire vine is rootbound, meaning that the roots are tightly wound together forming the shape of whatever container it was in, then you’ll want to gently rip the roots apart once before transplanting the creeping wire vine into its next container.

After you have transplanted your creeping wire vine, water it in and make sure it gets some sunlight for continual growth.

Planting creeping wire vines outside

Whether you are growing your creeping wire vine from seed, or you purchased a young creeping wire vine plant from a local garden center or greenhouse, eventually you’ll want to plant it outside.

To plant your creeping wire vine, gently squeeze the bottom of the container and pull the plant out of its pack.

Then, use a trowel or your hand to remove soil from where you’d like to plant it. 

If the soil is hard and packed down, consider using a tiller to break it up, or just push a shovel in the soil a few times to break up the clumps.

Best soil type for creeping wire vines

You can check your creeping wire vine plant’s tag for specific information regarding soil needs.

You may need to mix in some potting soil or other soil additives to get your soil to the ideal consistency.

When to plant creeping wire vines outside

Choosing when to plant creeping wire vines outside is an important consideration. If you plant them too early, there’s the risk of a late frost killing them off.

As a general rule of thumb, typically if you wait until after Mother’s Day you’ll be fine to plant creeping wire vines outside. That being said, in Central PA we have had late frosts later than Mother’s Day, so make sure to check the forecast for your area in the spring to make sure that there isn’t a deep frost on the horizon.

In some cases, planting creeping wire vines outside before Mother’s Day is definitely doable. Some annuals are just more hardy than others, so you’ll want to consider the hardiness of your creeping wire vine, too. For example, the Bubblegum Supertunias that Homestead Gardens sells can often be planted outside as early as mid to late March, which is well before Mother’s Day.

It depends on the plant’s size, maturity, hardiness (did the greenhouse you purchased the plant from “harden it off”?), and spring weather.

Where to plant creeping wire vines

Once you have your creeping wire vine, you’ll need some soil and a spot to plant it. If you’re going to be planting it directly outside from the pack you purchased it in, you have the option of planting the creeping wire vine in the landscape, in a hanging basket, or in a pot. A creeping wire vine will do great in any of these locations.

Sunlight requirements for creeping wire vines

If your creeping wire vine receives too little or too much sunlight exposure, it will likely still live, but may not grow as abundantly and could require more care.

There are general sunlight requirements for all creeping wire vines. For specific sunlight requirements for the variety of creeping wire vine that you purchased, make sure to check the plant tag.

Best temperature and humidity for creeping wire vines

Most areas have plenty of temperature swings, so an easy way to determine if your growing area will work for creeping wire vines is to check your USDA growing zone.

A creeping wire vine will grow well in most USDA growing zones, but the length of its season will vary depending on the region.

Watering creeping wire vines

One of the most important factors to keeping your creeping wire vine looking healthy is to diligently water it throughout the summer. 

For creeping wire vines, you’ll know they need water when the top inch of soil is dried out. To check, you can stick your finger into the soil down to the first joint in your finger. If it’s moist, no need to water the creeping wire vine plant. If it’s dry, you’ll want to water it in.

Be careful that you don’t overwater the creeping wire vine. A creeping wire vine plant can be susceptible to diseases if it gets too much water. 

If you planted the creeping wire vine in a container, make sure that it has holes in the bottom for excess water to escape. Otherwise, the water can collect at the bottom of the container and cause root rot, or other diseases.

Fertilizing creeping wire vines

Another important factor for plant health is keeping your creeping wire vine fed with nutrition.

If the creeping wire vine is planted in the ground, you can lessen the amount of fertilizer it’ll need by building up the soil with compostable material in the year(s) leading up to your planting. Otherwise, you’ll want to fertilize the creeping wire vine throughout the summer. 

A good rule of thumb for fertilizing creeping wire vines is to give the plant a water-soluble fertilizer every third watering. This rule helps to account for the change in temperature and weather throughout the season. For example, in May you won’t be watering your creeping wire vine plant as much as in the heat of the summer in August. So feeding the plant every third watering helps to provide creeping wire vines what it needs throughout the season, no matter the weather conditions.

It’s also recommended to plant the creeping wire vine with a slow-release form of fertilizer to feed the plant slowly throughout the summer. You can add this in with your potting soil in a pot.

Growing creeping wire vines in a hanging basket

If you’re growing creeping wire vines in a hanging basket, you’ll want to make sure you don’t overfill the basket with plants. Plants will generally fill in the space you give them, so if the hanging basket isn’t packed full when you first plant it, that’s great.

The more creeping wire vines you plant in your hanging basket, the more you’ll need to water the hanging plants. In general, if you have more plants competing for water and soil, it’ll take more maintenance to keep the hanging basket looking beautiful.

If you’re watering your creeping wire vines in a hanging basket, you can check if it needs water by lifting the basket from beneath. If the basket is noticeably light, it could use some water. 

You’ll know you overwatered your creeping wire vine in a hanging basket if water comes dripping or streaming out the bottom of the basket where the holes are.

Growing creeping wire vines in a pot

As mentioned above, be careful you don’t plant too many creeping wire vines in a flower pot.

The answer for how to care for creeping wire vines grown in a pot will vary according to the size of the pot. In general, make sure that it has plenty of room to grow and has adequate sunlight exposure where the pot is placed.

A creeping wire vine that is planted in a container, whether it’s a pot or a hanging basket, will need to be watered more than creeping wire vines grown in the landscape, since they won’t be able to pull natural water from the ground.

Growing creeping wire vines in the landscape

Choosing creeping wire vines for your flower beds or other landscaping is a great choice. They make for great borders and can help add beauty to your yard.

Since you’re planting them in a permanent spot, you’ll want to be extra careful when planting creeping wire vines in the ground outside. Make sure that there’s little chance of frost and that the creeping wire vines are in a spot that matches their sunlight needs.

If you do have a late frost, and your creeping wire vines are already in the ground, you can cover them overnight with a bucket or sheet to protect them in most cases.

How to get creeping wire vines to bloom

If creeping wire vines are not blooming it could be for a variety of reasons. 

First and foremost, ensure that the plant is getting enough water, fertilizer, and sunlight. If creeping wire vines are not given the basic necessities, they’ll resort to growing only what they can, which may mean not producing flowers.

Outside of that, creeping wire vines can sometimes get diseases that prevent them from blooming or stops their blooms.

Deadheading and pruning creeping wire vines

You can deadhead your creeping wire vines to promote future blooms.

For some varieties, this isn’t necessary and the plant will continue blooming just fine without any deadheading. For other plant varieties, the spent blooms can look ugly so you’ll want to snap those off or cut them back.

Cutting back or pruning your creeping wire vine can be healthy for the plant. You shouldn’t need to do this more than a few times throughout the summer. It can be good to do this if the plant is overgrowing its area, or overpowering another plant in a container.

Common diseases for creeping wire vines

A creeping wire vine is more susceptible to common diseases, such as downy mildew or root rot when it isn’t cared for properly. That being said, even creeping wire vines that are given the correct care can fall victim to some diseases.

Consult with your local garden center if you notice that your creeping wire vines have a disease.

Overwintering creeping wire vines

While it is possible to overwinter your creeping wire vines, this is not common for creeping wire vines.

A creeping wire vine is an annual, meaning that it lives for one growing season and then dies. If you’d like to grow a plant that comes back every spring, you’ll want to grow a perennial.

Pest control for creeping wire vines

Typically, natural predators are enough to take care of bugs and pests that eat at your creeping wire vines. For example, ladybugs will eat aphids and can help control them.

However, in some cases, you will need to take extra measures to kill off plant pests. Again, consult with your local garden center for a specific solution to your pests.

Companion plants for creeping wire vines

There are many other plants that grow great with creeping wire vines. These are what we would call “companion plants.” This means that if they are planted together they will generally complement each other with their colors and growing styles.

When looking for companion plants for your creeping wire vines, look for plants that have similar growing needs. This is an easy way to find plants that grow well. For example, if two plants love the sun, require similar fertilizer needs and one is taller while the other is a spreader, they will probably be great companion plants in a pot or hanging basket.

Varieties of creeping wire vines

There are many varieties of creeping wire vines. In general, their growing needs will be consistent across these varieties, but it’s always best to check the plant’s tag to make sure there isn’t specific instructions for your variety of creeping wire vines.

Propagating creeping wire vines

It’s possible to propagate creeping wire vines. 

To do so, you can cut off a small piece of the plant and put it in water for a week or so. Soon, the creeping wire vine should start growing fine roots.

Eventually, you’ll be able to plant the creeping wire vine cutting into soil.

For some varieties of creeping wire vines, propagating and then selling your cuttings as plants once they are established is illegal. Make sure there isn’t a patent on the creeping wire vine variety before you would do this.

Some annuals, such as sun coleus, can be propagated just by placing the cutting directly in potting soil.